Search:

almost all guns will work with hp but some guns need the lp to operate; angel, bob long g6r and victory .

by using a lower input, 500 psi, inot the higher end guns you should be a little more...

we may be able to get the burst disk out but if it does not then you will need a new reg.

Ethan is correct and keep in mind for us low pressure means 500 psi or less and SLP means 300 psi

also the first video is a little misleading - that occurred do the player breaking the asa or reg...

your only solution now is to use a table vice. this will get you the best grip on the burst disk to get it off. lock the burst disk in and tapp the end of the bottle. all you are trying to do is get...

very odd because if you use a box end wrench or a socket there is usually not an issue.

do you have a vice? lock it in a vice and then gently tap on the bottle end for leverage.

the pro reg lets you turn the reg so if it is on a gun the fill nipple does not get in your way.

given your use get the normal ninja reg and you can upgrade to a PRO at a future date.

given what you said i would recommend the normal ninja 68. black or grey. this tank can be used in remote but also on gun should you change your mind. also the reg is pressure adjustable so it will...

good choice on getting a good mask first, need to see to play.

sorry about the pink tanks and they are only available in October, sorry.

as far as what tank to get need some more info first. ...

there is no way to alter the pressure for that system. what you are seeing are the springs, not shims and if you remove them the reg may not work.

also 200 psi is too low for all guns, you may...

If you could get 4500 fills it may be worth it but considering where you play the 2 tanks may be the better option for you right now.

your welcome and go shoot someone for me this weekend!

Pm me your name address and phone number,I will mail you a new UFA but it will not ship until the 18 th, waiting on the machine to get done making them.

We use to do that many years ago and the set screw just doe snot hold that well and would loosen up very quickly. The glue is the best option and let me know the code when you have a chance.

Sorry but we do not, you will have to get a new UFA or see if hustle can get you just the knob from their parts.

i do want to apologize for this as we use locktite and it usually works very well....

usually not as the output pressure is the same as long as you are over 1000 psi in the tank. if you had like 200 psi than i would say this is the reason.

it has to be the tank o-ring on the gas system. this is what seals and keeps the air from coming out that vent hole. some asa or ufa on coils may cut it or damage the o-ring each time you remove it...

please be careful with what you hook up to. the fittings, hoses and other items must be properly rated to 4500 psi!!!

sometimes the hpa tanks do not give enough pressure for the older guns and the cup seal is not closing properly because of this and leaking down the barrel.

It will be perfect for the 68, that is what it was designed for. It will fit the other sizes but the 68 will fit the best and you shoul shave no issues at all

The tank should be measured by a hydro tester to make sure it is under 2 inches.

even if it does not need to be hydro tested the tank should be visual inspected on the inside to be safe. Also...

Correct and no worries as long as it does not leak

For your situation get a pro reg and set it at 550. This is a great pressure for all the high end guns and puts less stress on the gun so it operates more efficiently and consistently.

The SHP...

this may be a hard one then!

like reerun said check your local fire station?

given the picture i would say the threads are toast on both the asa and the reg.

aluminum threads on the reg and the asa when they lock up are very difficult to get back apart. i am sorry to say...

have you checked the local paintball store or field? many have a compressor and they may fill it